Install Google Chrome on Fedora 36/35, CentOS Stream 9/8, Red Hat (RHEL) 9/8, Rocky Linux 8.5 - Comment Page: 11

This guide explains howto install Google Chrome Web browser on Fedora 36/35/34/33/32 and CentOS Stream / Red Hat (RHEL) 9/8.5 / Rocky Linux 8.5. Best way to install and keep up-to-date with Google Chrome browser is use Google's own YUM/DNF repository. Check video guide, howto install Google Chrome on Fedora 36/35/34/33: Watch More Videos and Subscribe to Youtube Channel Check video guide, howto install Google Chrome on Red Hat (RHEL) 9.0/8.5: Check video guide, howto install Google Chrome on CentOS Stream 9/8: Watch More Videos and Subscribe to Youtube Channel Check video guide, howto install Google Chrome on Rocky Linux...

367 comments on “Install Google Chrome on Fedora 36/35, CentOS Stream 9/8, Red Hat (RHEL) 9/8, Rocky Linux 8.5 - Comment Page: 11

1 9 10 11 12 13
    1. Puzzled! Always your instructions perfect, but this time google-chrome-stable under Fedora 23 will only run as root. Have checked file permissions, etc. and they all seem ok. Am I missing something?

      Your help appreciated!

      • Hi Bogo,


        What you see in terminal if you try to run google-chrome as normal user?

        • Hi

          Sorry for delay. Been away.

          I see nothing when I run “google-chrome” or “google-chrome-stable” in the terminal. And a ctl-C just takes me back to the prompt. Should I be looking for some error log somewhere?


          • yum install google-chrome-stable*

            I am on CentOS 7 and at the time of writing it installed :

            Add the wildcard and it will look for the most recent version to your install.

            • Hi Obleeks,

              “yum install google-chrome-stable*” actually installs all packages which starts with google-chrome-stable not latest version. You get always latest version without wilcard.

          • JR, still can’t run google-chrome on Fedora 23 despite removing and re-installing.

            I see nothing in the terminal: no response, I just exit via ctl-C.

            Any suggestions appreciated.

            TIA Bogo

            • Hi Bogo,

              Could you post output of following command (example to :

              dnf list installed

              I can setup exactly same machine and test is it working for me with same setup.

          • Copy and paste these syntax onto your terminal but make sure it is running on root user:
            cat < /etc/yum.repos.d/google-chrome.repo
            name=google-chrome – \$basearch

            Then press enter

            At this point, you should be still at the root user. You can now type in:
            dnf install google-chrome-stable

    2. another helpful post! thanks, works great on my Fedora 23 32-bit workstation. now I can do the kindle reader chrome add-on

    3. Thanks for the effort of putting this up!

    4. I run with no problem today as always with the latest stable under 64 bits F23.

      Bogo writes:
      Bogo on February 7, 2016 at 6:00 am

      Could it be a launcher issue?
      Bogo, because you use the word terminal may I ask if you try to start within an SSH session, or some terminal emulator, using a command line, or as I do from the Applications menu on the PC display?

      You issue MAY BE DUE to a Wayland idiosyncrasy. May I suggest to repeat your test by selecting an alternate display manager with the small wheel visible on the display when you are prompted for your login password?

      • Thanks Jacques,

        I still can’t find any problem with Bogo setup. And I just write this using Chrome Beta on Fedora 23 and no problems at all.

        But you might be totally right and alternate display manager is good to try.

        • Thanks Jacques & JR

          1. I have tried both from the menu and from terminal. The only way I can get it to run is as root from the terminal which is not satisfactory, obviously.

          2. Followed up your suggestion of a Wayland issue. I run Gnome 3 normally, so changed to Wayland and logged in. Chrome then runs as normal from the menu.

          Only problem with Wayland is that it is a little sluggish, and also there are times when I can’t log-in and have to revert to Gnome with X server.

          It would be good to have Chrome running under Fedora 23, X-server & Gnome 3. Frustrating to know that you guys can do it with the identical set-up. I don’t get the relationship between Chrome & Wayland & Gnome 3. Wayland wasn’t even in the picture until Jacques suggested it – it seems like a reverse relationship!

          Solution still eagerly sought! Thanks for your help in the meantime …

          • Dear Bogo,

            Have you please tried to run Firefox (or at least one other browser) both as root and as regular user, and in all cases with X11 and with Wayland)? Faster more sophisticated tools exist, I know, but in your case I would start that way.

            My educated guess is that you gave a permission problem in some component of the X11 system.
            There is nothing sarcastic in the following, just my way to describe the situation.
            When you get a runny nose, it does not help to complain about the weather or heating the room where you stay. Better have your nose examined and eventually, for example if the liquid is not transparent, get some antibiotics.
            As far was a human being can be sure, I am sure that CHROME IS NOT TO BE BLAMED IN YOUR CASE.

            Don’t be angry at me please, I am trying to help you: the solution of your problem will come much faster from an F23 forum than from a Chrome forum. With a little bit of luck Firefox may well suffer from the same disease.


            • Addendum

              To: moderator
              Please feel free to remove from my previous post whatever appears to you as excessively agressive.

              To: Bongo
              Here is how to start what I meant by faster tools:

              1-Do the following under the display manager which you wish to use by default, logged in as regular user

              2-Open an extra terminal (in addition to the one used to launch Chrome if you want to launch from a terminal)

              3-Before launching Chrome the way you like, enter the following command in the extra window (including answering the sudo prompt):
              sudo journalctl -f _COMM=gdm-x-session | tee myXorg.log

              4-Launch the browser

              5-Watch the extra window

              6-After exiting/killing the browser , hit CTRL-C in the extra window.

              7-If you seek extra help send file myXorg.log with your message


    5. yum is depreciated, we should use dnf correct.

      • Yes, YUM is deprecated on Fedora 23/22, but not older Fedora’s or CentOS/Red Hat 7.

        I’m not sure did you read this guide, because I have separated commands for F23/F22 (dnf) and older Fedora’s and CentOS/Red Hat 7 (yum).

        Feel free to tell us your correct way to use only dnf?

        • I believe he was confused(as am I) that you added the repository to yum instead of dnf in step 2, and then installed it with dnf in step 3. Or is that the only way it should/can be done?

          • Hi Person,

            This is how dnf works. Check

            Most important part:

            Adding a DNF Repository
            To define a new repository, you can either add a [repository] section to the /etc/dnf/dnf.conf file, or to a .repo file in the /etc/yum.repos.d/ directory. All files with the .repo file extension in this directory are read by DNF, and it is recommended to define your repositories here instead of in /etc/dnf/dnf.conf.

            So yes, you could define repository directly to /etc/dnf/dnf.conf, but it is recommended to define your repositories to .repo files in the /etc/yum.repos.d/ directory.

            • I was just bit confused with dnf vs yum and the repos. Your explanation cleared that up. Thank you for the info.

    6. I’m getting this error when I perform a dnf update:
      Failed to synchronize cache for repo ‘google-chrome’ from ‘’: Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried, disabling.

    7. where can i get 32 bit chrome for fedora 22?

      • Hi nitin,

        Unfortunately 32-bit version of Google Chrome isn’t available anymore. Google dropped 32-bit support.

    8. hi there :)

      i hace sucsses install the chrome
      but i can’t open it add a normal user not root user
      i used this command
      “google-chrome –no-sandbox –user-data-dir”
      but when i shutdown the command it also happen with chrome.
      any suggest?


      • How to roll back the web browser chrome to a previous version ?? In version 54 all the time crochets translation . Tried to deliver the package version 40 (which does not have this problem) writes that yum can’t resolve dependency alsa

    9. No package google-chrome-beta available

      I also tried google-chrome-stable but it doesnt work

    10. There is a problem for share via twitter.
      Thanks for your this blog

    11. You are the wind beneath my wings. ;)

    12. Worked well for me on Fedora 25. Thank you!

    13. Doesn’t work:
      Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried,

    14. Thanks for posting the Chrome fix for Fedora 25.

1 9 10 11 12 13

Leave a Reply to Stanley Dal Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.