Install Google Chrome on Fedora 36/35, CentOS Stream 9/8, Red Hat (RHEL) 9/8, Rocky Linux 8.5 - Comment Page: 8

This guide explains howto install Google Chrome Web browser on Fedora 36/35/34/33/32 and CentOS Stream / Red Hat (RHEL) 9/8.5 / Rocky Linux 8.5. Best way to install and keep up-to-date with Google Chrome browser is use Google's own YUM/DNF repository. Check video guide, howto install Google Chrome on Fedora 36/35/34/33: Watch More Videos and Subscribe to if-not-true-then-false.com Youtube Channel Check video guide, howto install Google Chrome on Red Hat (RHEL) 9.0/8.5: Check video guide, howto install Google Chrome on CentOS Stream 9/8: Watch More Videos and Subscribe to if-not-true-then-false.com Youtube Channel Check video guide, howto install Google Chrome on Rocky Linux...

367 comments on “Install Google Chrome on Fedora 36/35, CentOS Stream 9/8, Red Hat (RHEL) 9/8, Rocky Linux 8.5 - Comment Page: 8

1 6 7 8 9 10 13
    1. Actually I have a similar problem with the above while installing Chrome stable version. Another ‘perl’ package..and I don’t know how to deal with it.

      The error codes should be:


      Error: Package: 1:perl-Pod-Escapes-1.04-211.fc17.noarch (@anaconda-0)
      Requires: perl = 4:5.14.2-211.fc17
      Removing: 4:perl-5.14.2-211.fc17.i686 (@anaconda-0)
      perl = 4:5.14.2-211.fc17
      Updated By: 4:perl-5.14.3-217.fc17.i686 (updates)
      perl = 4:5.14.3-217.fc17
      You could try using --skip-broken to work around the problem
      ** Found 2 pre-existing rpmdb problem(s), 'yum check' output follows:
      1:perl-Pod-Escapes-1.04-217.fc17.noarch is a duplicate with 1:perl-Pod-Escapes-1.04-211.fc17.noarch
      1:perl-Pod-Escapes-1.04-217.fc17.noarch has missing requires of perl = ('4', '5.14.3', '217.fc17')

      Reply
      • Hi OR,

        Could you run:

        
        yum update
        

        And post output of following command:

        
        yum check
        
        Reply
        • Thank you for the instructions! I’ve run the two commands and have this output:

          ** Found 2 pre-existing rpmdb problem(s), 'yum check' output follows:
          1:perl-Pod-Escapes-1.04-217.fc17.noarch is a duplicate with 1:perl-Pod-Escapes-1.04-211.fc17.noarch
          1:perl-Pod-Escapes-1.04-217.fc17.noarch has missing requires of perl = ('4', '5.14.3', '217.fc17')

          Reply
          • Try following:

            
            yum remove perl-Pod-Escapes-1.04-211.fc17.noarch
            
            yum clean all
            
            yum update
            
            yum check
            

            Do you still get same error?

            Reply
            • I’ve done all the instruction above and have successfully removed the package. However, the problem still exists:
              [[email protected] /]# yum check
              Loaded plugins: langpacks, presto, refresh-packagekit
              1:perl-Pod-Escapes-1.04-217.fc17.noarch has missing requires of perl = ('4', '5.14.3', '217.fc17')
              Error: check all

              What should I do then..

              Reply
            • Oh another segment of code attached:

              [[email protected] ~]# yum remove pero-Pod-Escapes-1.04-211.fc17.noarch
              Loaded plugins: langpacks, presto, refresh-packagekit
              No Match for argument: pero-Pod-Escapes-1.04-211.fc17.noarch
              No Packages marked for removal

              Reply
              • Actually you have little typo on yum remove pero-Pod… it should be yum remove perl-Pod…

                So try same again with right yum remove command, if you still get this same error, could you post output of following commands:

                
                rpm -qa perl\* |sort
                
                yum list installed |grep perl
                
                Reply
                • I’m surprised to find out that finally I installed Chrome successfully. Maybe it was because the system was not fully updated.. Anyway. Thank you for all the help and instructions in these days. Plus, I truly love your website! It helps me a lot. Hope to find out some more interesting things on your site:)

                  Best.

                  Reply
    2. If you are having both 32 and 64 bit inside /etc/yum.repos.d/google-chrome.repo then please be careful to have different names in the square brackets at the top instead of both being ‘google-chrome’.

      For example:
      [google-chrome-32]

      [google-chrome-64]

      Reply
    3. i cant edit /etc/yum.repos.d/google-chrome.repo

      Reply
      • Hi Mohammad,

        Could you tell more specific reason why you can’t edit /etc/yum.repos.d/google-chrome.repo file?

        Reply
        • My problem fixed.
          Thanks.

          Reply
    4. Thanks for the quick help! installed flawlessly

      Reply
    5. I cannot install google chrome on my compute nodes. I followed the directions and created a repo file in /etc/yum.repos.d, and this installed fine on my central computer, but it won’t install on my nodes.

      [[email protected] install]# ssh compute-0-0 “yum install google-chrome-stable”
      http://mirror.centos.org/centos/6/addons/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 – “The requested URL returned error: 404”
      Trying other mirror.
      Error: Cannot retrieve repository metadata (repomd.xml) for repository: addons. Please verify its path and try again

      Reply
    6. [[email protected] ~]# yum repolist
      http://mirror.centos.org/centos/6/addons/x86_64/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 – “The requested URL returned error: 404”
      Trying other mirror.
      repo id repo name status
      Rocks-6.0 Rocks 6.0 4,148
      addons CentOS-6 – Addons 0
      adobe-linux-i386 Adobe Systems Incorporated 0
      atrpms Fedora Core 6 – x86_64 – ATrpms 0
      base CentOS-6 – Base 0
      google-chrome google-chrome – 64-bit 0
      kbs-CentOS-Extras CentOS.Karan.Org-EL6 – Stable 0
      updates CentOS-6 – Updates 0
      repolist: 4,148

      [[email protected] ~]# cat /etc/yum.repos.d/*.repo
      [adobe-linux-i386]
      name=Adobe Systems Incorporated
      baseurl=http://linuxdownload.adobe.com/linux/i386/
      enabled=1
      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-adobe-linux

      [atrpms]
      name=Fedora Core $releasever – $basearch – ATrpms
      baseurl=http://www.mirrorservice.org/sites/download.atrpms.net/el$releasever-$basearch/atrpms/stable
      gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms
      gpgcheck=1

      [base]
      name=CentOS-$releasever – Base
      mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
      #baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
      enabled=1
      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
      #released updates
      [updates]
      name=CentOS-$releasever – Updates
      mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
      #baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
      enabled=1
      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
      [addons]
      name=CentOS-$releasever – Addons
      mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons
      #baseurl=http://mirror.centos.org/centos/$releasever/addons/$basearch/
      enabled=1
      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

      # CentOS-Base.repo
      #
      # The mirror system uses the connecting IP address of the client and the
      # update status of each mirror to pick mirrors that are updated to and
      # geographically close to the client. You should use this for CentOS updates
      # unless you are manually picking other mirrors.
      #

      # All debug packages from all the various CentOS-5 releases
      # are merged into a single repo, split by BaseArch
      #
      # Note: packages in the debuginfo repo are currently not signed
      #

      [debug]
      enabled = 0
      name=CentOS-6 – Debuginfo
      baseurl=http://debuginfo.centos.org/6/$basearch/
      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-6

      # CentOS-Media.repo
      #
      # This repo is used to mount the default locations for a CDROM / DVD on
      # CentOS-6. You can use this repo and yum to install items directly off the
      # DVD ISO that we release.
      #
      # To use this repo, put in your DVD and use it with the other repos too:
      # yum –enablerepo=c6-media [command]
      #
      # or for ONLY the media repo, do this:
      #
      # yum –disablerepo=\* –enablerepo=c6-media [command]

      [c6-media]
      enabled = 0
      name=CentOS-$releasever – Media
      baseurl=file:///media/CentOS/
      file:///media/cdrom/
      file:///media/cdrecorder/
      gpgcheck=1

      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
      ### Name: ELRepo.org Community Enterprise Linux Repository for el6
      ### URL: http://elrepo.org/

      [elrepo]
      enabled = 0
      name=ELRepo.org Community Enterprise Linux Repository – el6
      baseurl=http://elrepo.org/linux/elrepo/el6/$basearch/
      mirrorlist=http://elrepo.org/mirrors-elrepo.el6

      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-elrepo.org
      protect=0

      [elrepo-testing]
      enabled = 0
      name=ELRepo.org Community Enterprise Linux Testing Repository – el6
      baseurl=http://elrepo.org/linux/testing/el6/$basearch/
      mirrorlist=http://elrepo.org/mirrors-elrepo-testing.el6

      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-elrepo.org
      protect=0

      [elrepo-kernel]
      enabled = 0
      name=ELRepo.org Community Enterprise Linux Kernel Repository – el6
      baseurl=http://elrepo.org/linux/kernel/el6/$basearch/
      mirrorlist=http://elrepo.org/mirrors-elrepo-kernel.el6

      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-elrepo.org
      protect=0

      [elrepo-extras]
      enabled = 0
      name=ELRepo.org Community Enterprise Linux Repository – el6
      baseurl=http://elrepo.org/linux/extras/el6/$basearch/
      mirrorlist=http://elrepo.org/mirrors-elrepo-extras.el6

      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-elrepo.org
      protect=0
      [epel]
      enabled = 0
      name=Extra Packages for Enterprise Linux 6 – $basearch
      #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch
      mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=$basearch
      failovermethod=priority

      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6

      [epel-debuginfo]
      enabled = 0
      name=Extra Packages for Enterprise Linux 6 – $basearch – Debug
      #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch/debug
      mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-6&arch=$basearch
      failovermethod=priority

      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
      gpgcheck=1

      [epel-source]
      enabled = 0
      name=Extra Packages for Enterprise Linux 6 – $basearch – Source
      #baseurl=http://download.fedoraproject.org/pub/epel/6/SRPMS
      mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-source-6&arch=$basearch
      failovermethod=priority

      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
      gpgcheck=1
      [epel-testing]
      enabled = 0
      name=Extra Packages for Enterprise Linux 6 – Testing – $basearch
      #baseurl=http://download.fedoraproject.org/pub/epel/testing/6/$basearch
      mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=testing-epel6&arch=$basearch
      failovermethod=priority

      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6

      [epel-testing-debuginfo]
      enabled = 0
      name=Extra Packages for Enterprise Linux 6 – Testing – $basearch – Debug
      #baseurl=http://download.fedoraproject.org/pub/epel/testing/6/$basearch/debug
      mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=testing-debug-epel6&arch=$basearch
      failovermethod=priority

      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
      gpgcheck=1

      [epel-testing-source]
      enabled = 0
      name=Extra Packages for Enterprise Linux 6 – Testing – $basearch – Source
      #baseurl=http://download.fedoraproject.org/pub/epel/testing/6/SRPMS
      mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=testing-source-epel6&arch=$basearch
      failovermethod=priority

      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
      gpgcheck=1
      [google-chrome]
      name=google-chrome – 64-bit
      baseurl=http://dl.google.com/linux/chrome/rpm/stable/x86_64
      enabled=1
      gpgcheck=1
      gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub

      # All new packages are now released to the testing repository first
      # and only moved into Stable after a period of time
      # Note: The testing repository is disabled by default

      [kbs-CentOS-Extras]
      name=CentOS.Karan.Org-EL$releasever – Stable
      gpgcheck=1
      gpgkey=http://centos.karan.org/RPM-GPG-KEY-karan.org.txt
      enabled=1
      baseurl=http://centos.karan.org/el$releasever/extras/stable/$basearch/RPMS/

      # pkgs in the -Testing repo are not gpg signed
      [kbs-CentOS-Testing]
      name=CentOS.Karan.Org-EL$releasever – Testing
      gpgcheck=0
      gpgkey=http://centos.karan.org/RPM-GPG-KEY-karan.org.txt
      enabled=0
      baseurl=http://centos.karan.org/el$releasever/extras/testing/$basearch/RPMS/
      [remi]
      name=Les RPM de remi pour Enterprise Linux 5 – $basearch
      baseurl=http://rpms.famillecollet.com/enterprise/5/remi/$basearch/
      http://iut-info.univ-reims.fr/remirpms/enterprise/5/remi/$basearch/
      enabled=0
      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-remi
      failovermethod=priority

      [remi-test]
      name=Les RPM de remi en test pour Enterprise Linux 5 – $basearch
      baseurl=http://rpms.famillecollet.com//enterprise/5/test/$basearch/
      enabled=0
      gpgcheck=1
      gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-remi

      [Rocks-6.0]
      name=Rocks 6.0
      baseurl=http://130.191.28.140/install/rocks-dist/x86_64
      enabled = 1
      ### Name: RPMforge RPM Repository for RHEL 6 – dag
      ### URL: http://rpmforge.net/
      [rpmforge]
      enabled = 0
      name = RHEL $releasever – RPMforge.net – dag
      baseurl = http://apt.sw.be/redhat/el6/en/$basearch/rpmforge
      mirrorlist = http://apt.sw.be/redhat/el6/en/mirrors-rpmforge
      #mirrorlist = file:///etc/yum.repos.d/mirrors-rpmforge

      protect = 0
      gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag
      gpgcheck = 1

      [rpmforge-extras]
      enabled = 0
      name = RHEL $releasever – RPMforge.net – extras
      baseurl = http://apt.sw.be/redhat/el6/en/$basearch/extras
      mirrorlist = http://apt.sw.be/redhat/el6/en/mirrors-rpmforge-extras
      #mirrorlist = file:///etc/yum.repos.d/mirrors-rpmforge-extras

      protect = 0
      gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag
      gpgcheck = 1

      [rpmforge-testing]
      enabled = 0
      name = RHEL $releasever – RPMforge.net – testing
      baseurl = http://apt.sw.be/redhat/el6/en/$basearch/testing
      mirrorlist = http://apt.sw.be/redhat/el6/en/mirrors-rpmforge-testing
      #mirrorlist = file:///etc/yum.repos.d/mirrors-rpmforge-testing

      protect = 0
      gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag
      gpgcheck = 1

      Please help!

      Reply
      • Hi,

        Following repo exists only CentOS 5, but not CentOS 6:

        
        [addons]
        name=CentOS-$releasever – Addons
        mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons
        #baseurl=http://mirror.centos.org/centos/$releasever/addons/$basearch/
        enabled=1
        gpgcheck=1
        gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
        

        So I recommend you to disable this, change:

        
        enabled=1
        ## to ##
        enabled=0
        
        Reply
    7. yeh! Thanx ! works fine…

      Reply
    8. Stable installed fine and runs nicely on Oracle Linux 6.2 (2.6.39).

      Still got three could not get owner of name org.chromium.Mtpd errors.

      Also the Firefox nemsis “failed to create drawable” error.

      But it works and that’s more than I can say for Firefox after I attempted to add Flash.

      So thanks!

      Reply
    9. Hi,

      Yesterday, from the official Fedora website, I downloaded and installed 32-bit Fedora 18. All went well.

      This morning I attempted to install Google Chrome browser into this using the instructions on this web page.

      I copied and pasted the instructions for the 32-bit repo given on this webpage into new file google-chrome.repo which now resides in /etc/yum.repos.d/

      When the command “yum install google-chrome-stable” was executed (as root!) everything went well, up to the point shown below.

      Retrieving key from https://dl-ssl.google.com/linux/linux_signing_key.pub
      Importing GPG key 0x7FAC5991:
      Userid : “Google, Inc. Linux Package Signing Key ”
      Fingerprint: 4cca 1eaf 950c ee4a b839 76dc a040 830f 7fac 5991
      From : https://dl-ssl.google.com/linux/linux_signing_key.pub
      Is this ok [y/N]: y
      Running Transaction Check
      Running Transaction Test

      Transaction Check Error:
      file /usr/share/locale/en/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-devel-2.0-4.fc18.i686
      file /usr/share/locale/fr/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-devel-2.0-4.fc18.i686
      file /usr/share/locale/pl/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-devel-2.0-4.fc18.i686
      file /usr/share/locale/en/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-runtime-2.0-4.fc18.i686
      file /usr/share/locale/fr/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-runtime-2.0-4.fc18.i686
      file /usr/share/locale/pl/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-runtime-2.0-4.fc18.i686
      file /usr/share/locale/en/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-client-2.0-4.fc18.i686
      file /usr/share/locale/fr/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-client-2.0-4.fc18.i686
      file /usr/share/locale/pl/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-client-2.0-4.fc18.i686
      file /usr/share/locale/en/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-2.0-4.fc18.i686
      file /usr/share/locale/fr/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-2.0-4.fc18.i686
      file /usr/share/locale/pl/LC_MESSAGES/systemtap.mo from install of systemtap-sdt-devel-2.1-1.fc18.i686 conflicts with file from package systemtap-2.0-4.fc18.i686

      Error Summary
      ————-

      Could you please explain what these errors/conflicts are and if there is a solution to this problem.

      Thanks in advance for any help you may be able to give with this.

      Best regards,

      Stuart

      Reply
      • Hello Stuart,

        I had the same error as you, plus some redhad-lsb version error, and I managed to find a work-around to it by manually removing the old conflicting installations:

        yum remove systemtap-devel-2.0-4.fc18.i686
        yum remove systemtap-2.0-4.fc18.i686
        yum remove systemtap-client-2.0-4.fc18.i686
        yum remove systemtap-runtime-2.0-4.fc18.i686

        After this I recommend you run “yum clean all” just be sure, and you should be able to install chrome. (You may need to update lsb as well. Not sure, but if in case that happens just run “yum install/update redhat-lsb”.)

        I hope this helped.

        Reply
    10. Thanks markoT

      It works for me..

      ABHIJIT

      Reply
    11. in the processing of yum install google-chrome-stable, some error interruped it.That’s the error in the below ,please help me, thanks!

      Error: Missing Dependency: libc.so.6(GLIBC_2.11) is needed by package google-chrome-stable-25.0.1364.160-186726.i386 (google-chrome)
      Error: Missing Dependency: xdg-utils is needed by package google-chrome-stable-25.0.1364.160-186726.i386 (google-chrome)
      Error: Missing Dependency: libcurl.so.4 is needed by package google-chrome-stable-25.0.1364.160-186726.i386 (google-chrome)
      You could try using –skip-broken to work around the problem
      You could try running: package-cleanup –problems
      package-cleanup –dupes
      rpm -Va –nofiles –nodigest

      Reply
      • Hi vfhky,

        Could you first post output of following commands:

        
        uname -a
        
        lsb_release -a
        
        Reply
        • thanks for your answer, but i still cannot solve this problem…… how can i get touch with you conveniently?

          Reply
      • Did you ever discover a resolution to this problem. I’m getting the same thing.

        Reply
    12. Hi,

      I have problem whe running chorme on fedora 18 ,

      “Please start Google Chrome as a normal user. To run as root, you must specify an alternate –user-data-dir for storage of profile information.”

      Please help me

      Reply
      • Hi,

        Just start Google Chrome as normal user (not root user).

        Reply
      • i think you installed the chrome using the account of local user and opent the chrome with root .

        Reply
    13. One recommendation:

      You should yum automatically select the right architecture. Therefore, change google-chrome.repo to:


      [google-chrome]
      name=google-chrome
      baseurl=http://dl.google.com/linux/chrome/rpm/stable/$basearch
      enabled=1
      gpgcheck=1
      gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub

      Reply
    14. Hi, I followed your steps but I am receiving the following error:

      Is this ok [y/N]: y
      Downloading Packages:
      warning: rpmts_HdrFromFdno: Header V4 DSA/SHA1 Signature, key ID 7fac5991: NOKEY
      Retrieving key from https://dl-ssl.google.com/linux/linux_signing_key.pub

      GPG key retrieval failed: [Errno 14] PYCURL ERROR 7 – “Failed to connect to 2607:f8b0:4002:c04::5d: Network is unreachable”

      What could be causing this?

      Reply
      • Hi Luis,

        Could you simply try again, maybe some network was really unreachable?

        Reply
1 6 7 8 9 10 13

Leave a Reply to Neville A. Cross Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close