Fedora 32/31/30 nVidia Drivers Install Guide - Comment Page: 106

This is guide, howto install nVidia proprietary drivers on Fedora 32/31/30/29/28 and disable Nouveau driver. This guide works with GeForce 6/7/8/9/200/300/400/500/600/700/800/900/10/20 series cards. GeForce 20 series cards works with 450.xx nVidia drivers GeForce 600/700/800/900/10 series cards works with 390.xx and 450.xx nVidia drivers GeForce 400/500 series cards works with 390.xx nVidia drivers GeForce 8/9/200/300 series cards works with 340.xx nVidia drivers [inttf_post_ad1] This is totally different guide than my earlier guides, like Fedora 20 nVidia driver install. This guide uses nVidia drivers directly from nVidia site and dkms to help on kernel updates. Have...

2,817 comments on “Fedora 32/31/30 nVidia Drivers Install Guide - Comment Page: 106

1 104 105 106 107 108 109
    1. Hi, I do that an run perfect, but late if I do dnf update, I reset and lost the interface, I don’t not if that is true but I think the system up the console mode or a system without interface.

      Thank you

      Reply
    2. I’m getting blank cursor after bootscreen.

      My system config
      AMD Ryzen 7 4800H
      Nvidia 1660Ti mobile
      16GB
      I have one nvme drive and fedora is installed on secondary sata drive.

      Reply
    3. Just an FYI, on my F32 system, I could NOT get it to build an initrd correctly until I removed /usr/lib/modprobe.d/nvidia-installer-disable-nouveau.conf AND the file in /etc/modprobe.d

      Reply
    4. Hi guys , there is a way to update the nvidia drivers without doing this every time the kernel is updated?
      I have to repeat almost the same processes running the .bin file and hope that don’t break anything.

      Reply
    5. Thanks man, it worked as expected

      [email protected]:~/Downloads$ uname -a
      Linux localhost.localdomain 5.6.16-300.fc32.x86_64 #1 SMP Thu Jun 4 18:08:38 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      [email protected]:~/Downloads$ lspci |grep -E “VGA|3D”
      07:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2070 SUPER] (rev a1)

      Reply
    6. [[email protected] ~]# nvidia-installer -v |grep version
      nvidia-installer: version 440.82
      [[email protected] ~]# uname -a
      Linux localhost.localdomain 5.6.16-300.fc32.x86_64 #1 SMP Thu Jun 4 18:08:38 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected] ~]# lspci |grep -E “VGA|3D”
      21:00.0 Audio device: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] (rev 01)
      26:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2070 SUPER] (rev a1)

      Reply
    7. Thank you so much! It’s working!

      nvidia-installer: version 440.82

      Linux fedora 5.6.16-300.fc32.x86_64 #1 SMP Thu Jun 4 18:08:38 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)

      Reply
    8. Perfect guide. Worked for flawlessly for me on Fedora 32 KDE spin. Thank you!

      Reply
    9. Do this method work for Fedora 32 Silverblue ???

      Reply
    10. how to apply this method for fedora silverblue ???

      Reply
      • Hi fatih,

        I haven’t tested this on silverblue, but this is very universal method so I guess so.

        Reply
    11. Hi, I’ve made all installation without problems, but at reboot the system doesn’t run gnome interface: only way is to disable Nvidia in BIOS and work with built-in video card only.
      Here my data:
      # nvidia-installer -v | grep version
      nvidia-installer: version 440.82
      # uname -a
      Linux aep 5.6.19-300.fc32.x86_64 #1 SMP Wed Jun 17 16:10:48 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      # lspci | grep -E “VGA|3D”
      00:02.0 VGA compatibile controller: Intel Corporation HD Graphics 530 (rev 06)
      01:00.0 3D controller: NVIDIA Corporation GM107M [Geforce GTX 950M] (reev a2)

      Thanks for any help could be possible.

      Andrea

      Reply
      • Hello Andrea,

        Looks like you have nVidia Optimus device and this guide is not working on your system, check step 1.2.

        Reply
    12. [[email protected] ~]# nvidia-installer -v |grep version
      nvidia-installer: version 440.82
      [[email protected] ~]# uname -a
      Linux host1.dns.com 4.18.0-193.6.3.el8_2.x86_64 #1 SMP Wed Jun 10 11:09:32 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected] ~]# lspci |grep -E “VGA|3D”
      01:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1)
      [[email protected] ~]#

      Reply
    13. About using secure boot and NVIDIA graphics cards . . . NVIDIA states: “it is not possible to use DKMS in conjunction with the module signing support built into nvidia-installer.” One can read the NVIDIA documentation for a more in-depth explanation, but long story short: installing NVIDIA graphics cards on Linux secure boot systems does not (practically) work. Actually it does work, that is, until you update the kernel. At that point you must then manually re-install the NVIDIA driver. For most of us, that’s not a practical, viable operating strategy. Thus, with NVIDIA, choose either running secure boot, or choose running the proprietary NVIDIA driver, but not both.

      Reply
    14. Worked with F31, KDE plasma, many thanks..

      nvidia-installer: version 440.82
      Linux rog-fedora 5.6.19-200.fc31.x86_64 #1 SMP Wed Jun 17 16:54:35 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      01:00.0 VGA compatible controller: NVIDIA Corporation GM204M [GeForce GTX 980M] (rev a1)

      Reply
    15. Yeah, well. It worked as far as I know, with a small issue that I can’t fix.
      Now only my external hdmi monitor works and the laptop one does not. Used to work the 2 of them, but after all install procedure only the hdmi external one works.

      Reply
1 104 105 106 107 108 109

Leave a Reply to JR Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close