Fedora 33/32/31 NVIDIA Drivers Install Guide - Comment Page: 108

This is guide, howto install NVIDIA proprietary drivers on Fedora 33/32/31/30/29 and disable Nouveau driver. This guide works with GeForce 8/9/200/300/400/500/600/700/800/900/10/20/30 series cards. GeForce RTX 30 series cards works with 455.xx NVIDIA drivers, (RTX 3090, RTX 3080 and RTX 3070) GeForce RTX 20 series cards works with 450.xx and 455.xx NVIDIA drivers (RTX 2080 Ti, RTX 2080, RTX 2070 Ti, RTX 2070, RTX 2060) GeForce GT/GTX 600/700/800/900/10 series cards works with 390.xx, 450.xx and 455.xx NVIDIA drivers (GTX 1080 Ti, GTX 1080, GTX 1070, GTX 1060, GTX 1660 ...) GeForce GT/GTX 400/500 series cards works with 390.xx NVIDIA drivers GeForce GT 8/9/200/300 series...

2,875 comments on “Fedora 33/32/31 NVIDIA Drivers Install Guide - Comment Page: 108

1 106 107 108 109 110 112
    1. could you add 32 bit patched version (340.108 installer)
      thank you
      T.

      Reply
    2. Hi after i set the level to 3 and reboot i get a black screen and i can’t do anything. Unfortunately i got no ssh connection setup and even ctrl alt F2 does nothing. Any help? Running on Fedora 32 and a GTX 750 Ti. Thanks.

      Reply
    3. Hi JR,

      Thanks a lot for this excellent guide, you have taken a weight from me because I was feeling like a loon for switching to nvidia (I had to because I needed TensorFlow)

      In the update that came with the kernel 5.7.11-200 gcc was updated to 10.2.1,therefore in order to be able to build the modules, when you execute the nvidia binary you must use the –no-cc-version-check

      i.e.

      ./NVIDIA-Linux-x86_64-450.57.run –no-cc-version-check

      Hope this helps someone.

      Cheers!

      Reply
    4. nvidia-installer -v |grep version
      nvidia-installer: version 450.57

      uname -a
      Linux localhost.localdomain 5.7.12-200.fc32.x86_64 #1 SMP Sat Aug 1 16:13:38 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      lspci |grep -E “VGA|3D”
      07:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2070 SUPER] (rev a1)

      Reply
    5. Thanks for the guide. I only had one issue… It failed on registering with DKMS. I have a Dell laptop with a Nvidia GeForce GTX 1050i. I went to https://pkgs.org/search/?q=dkms and ran dnf install dkms. I re-ran the driver install and everything worked perfect.

      Reply
    6. nvidia-installer -v |grep version :
      nvidia-installer: version 450.57

      uname -a :
      Linux XXXX 5.7.11-100.fc31.x86_64 #1 SMP Wed Jul 29 18:17:53 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      lspci |grep -E “VGA|3D” :
      02:00.0 VGA compatible controller: NVIDIA Corporation TU106 [GeForce RTX 2070] (rev a1)

      Reply
    7. I have a linux workstation with an old Quadro FX 1800. I upgraded to Fedora 29 and then followed these instructions precisely, but they did not work to upgrade my nvidia driver to 340.108. When running the 340.180 installer, it could not compile the nvidia uvm module. The error message was “Failed to install the kernel module through DKMS. No kernel module was installed; Please try installing without DKMS…”. I tried installing without DKMS and it worked!

      Reply
    8. Hi, this guide worked well for me. I just wanted to let you know :-)

      Reply
    9. nvidia-installer: version 390.138 ([email protected]) Thu May 14 05:09:46 PDT 2020
      Linux singularity 5.7.15-100.fc31.x86_64 #1 SMP Tue Aug 11 17:18:01 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      01:00.0 VGA compatible controller: NVIDIA Corporation GK104M [GeForce GTX 780M] (rev a1)

      Reply
    10. Thank you, no issues with the install:
      nvidia-installer: version 450.66

      Linux localhost.localdomain 5.7.16-200.fc32.x86_64 #1 SMP Wed Aug 19 16:58:53 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      09:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2080 SUPER] (rev a1)

      Reply
    11. nvidia-installer: version 450.66
      Linux tgn-ws01-tgn-home 5.7.16-200.fc32.x86_64 #1 SMP Wed Aug 19 16:58:53 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      29:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1)

      Reply
    12. Thanks for the guide, worked for me, after I caught my own mistakes. For new users having trouble, my suggestions are to check the following from the guide: (1) make sure you get the guide-recommended NVIDIA software version for your card, (2) disable SE Linux, (3) disable Secure Boot.

      nvidia-installer: version 440.100

      Linux localhost.localdomain 5.7.17-200.fc32.x86_64 #1 SMP Fri Aug 21 15:23:46 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      01:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1)

      Reply
    13. nvidia 390.138 can not be compiled under kernel 5.8:

      void *ptr = __vmalloc(size, GFP_KERNEL, PAGE_KERNEL);
      | ^~~~~~~~~

      Reply
    14. nvidia-installer -v | grep version shows
      nvidia-installer: version 390.138 ([email protected])

      uname -a shows
      Linux anna 5.7.17-200.fc32.x86_64 #1 SMP Fri Aug 21 15:23:46 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      lspci | grep -E VGA shows
      01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti]

      However f32 just supplied its 5.8.4 kernel, which did not work with the above VGA. Neither DKMS nor kernel modules (without DKMS) worked. So I am stuck with the 5.7.17 kernel. Any updates?

      And thank you so much for your good help.

      Reply
      • Hello Peter,

        I just updated this guide and patched 390.138 working with latest 5.8 kernels.

        Reply
        • Dear JR, OK, I got your new patched 390.138 for the 5.8 kernels and ran it for the 5.8.6-201.fc32.x86_64 kernel and it worked like a charm.

          Thank you!

          Reply
1 106 107 108 109 110 112

Leave a Reply to Dan Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close