Fedora 33/32/31 NVIDIA Drivers Install Guide - Comment Page: 112

This is guide, howto install NVIDIA proprietary drivers on Fedora 33/32/31/30/29 and disable Nouveau driver. This guide works with GeForce 8/9/200/300/400/500/600/700/800/900/10/20/30 series cards. GeForce RTX 30 series cards works with 460.xx NVIDIA drivers, (RTX 3090, RTX 3080 and RTX 3070) GeForce RTX 20 series cards works with 450.xx and 460.xx NVIDIA drivers (RTX 2080 Ti, RTX 2080, RTX 2070 Ti, RTX 2070, RTX 2060) GeForce GT/GTX 600/700/800/900/10 series cards works with 390.xx, 450.xx and 460.xx NVIDIA drivers (GTX 1080 Ti, GTX 1080, GTX 1070, GTX 1060, GTX 1660 ...) GeForce GT/GTX 400/500 series cards works with 390.xx NVIDIA drivers GeForce GT 8/9/200/300 series...

2,910 comments on “Fedora 33/32/31 NVIDIA Drivers Install Guide - Comment Page: 112

1 110 111 112 113
    1. The patched version (Download inttf NVIDIA patcher and patch NVIDIA-Linux-x86_64-390.138 for Kernel 5.9+) works perfectly on kernel 5.9.9-200.fc33.x86_64.
      Thanks!

      Reply
    2. genius all ok with kernel 5.9 thanks

      Reply
    3. Thank you.

      nvidia-installer: version 455.45.01

      Linux localhost.localdomain 5.9.9-200.fc33.x86_64 #1 SMP Thu Nov 19 21:25:45 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)

      03:00.0 3D controller: NVIDIA Corporation GM108M [GeForce MX130] (rev a2)

      Reply
    4. nvidia-installer: version 390.138 ([email protected])
      Linux localhost.localdomain 5.9.10-200.fc33.x86_64
      VGA compatible controller: NVIDIA Corporation GF116M [GeForce GT 555M/635M] (rev a1)

      Reply
    5. [[email protected] ~]$ nvidia-installer -v |grep version
      nvidia-installer: version 455.45.01
      [[email protected] ~]$ uname -a
      Linux localhost.localdomain 5.9.10-200.fc33.x86_64 #1 SMP Mon Nov 23 18:12:50 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected] ~]$ lspci |grep -E “VGA|3D”
      00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
      01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] (rev a1)
      [[email protected] ~]$

      All is working on a lenovo y520 with a 1050ti using this guide. Thanks Man!

      Reply
    6. I followed this entire guide for the NVIDIA 390.138 patched 5.9 kernel through the end.
      As I have a NVIDIA Geforce GT 630M

      is it normal that it keeps hanging on “started gnome display manager”..?

      Reply
      • This might be totally normal situation, if you have laptop with NVIDIA Optimus device. Could you post output of following command:

        lspci |grep -E "VGA|3D"
        

        You can find more information from before installation step 1.2 NVIDIA Optimus Technology.

        NVIDIA own documentation says:
        The driver may be installed normally on Optimus systems, but the NVIDIA X driver and the NVIDIA OpenGL driver may not be able to display to the laptop’s internal display panel unless a means to connect the panel to the NVIDIA GPU (for example, a hardware multiplexer, or “mux”, often controllable by a BIOS setting) is available. On systems without a mux, the NVIDIA GPU can still be useful for offscreen rendering, PRIME render offload, running CUDA applications, and other uses that don’t require driving a display.

        So what this means, if you can’t control NVIDIA Optimus from UEFI/BIOS then you can install NVIDIA drivers and everything works, except your laptop display panel.

        Reply
      • Unfortunately, it’s the same here with NVIDIA 390.138 patched 5.9 kernel although I have the option in the BIOS to switch between Intel/Discreet/Optimus.

        Mine is NVIDIA QUADRO NVS K2000M.

        It’s been long time since I haven’t been back to Linux because of such issues and alas not much has changed.

        For now I’ll stick with the nouveau driver.

        Anyway, thanks for the guide. It was very easy to follow.

        Reply
    7. Thanks for the guide!

      I am running Fedora 33 with kernel 5.9.11-200.fc33.x86_64.
      I followed the guide and installed 340.xx driver. It was successful. I am able to login to the desktop.
      But when I ran mplayer to play video, I got the following error:

      [[email protected] ~]$ mplayer dvd://1
      mplayer: /lib64/libOpenCL.so.1: no version information available (required by /lib64/libavutil.so.56)
      mplayer: /lib64/libOpenCL.so.1: no version information available (required by /lib64/libavutil.so.56)
      mplayer: symbol lookup error: /lib64/libavutil.so.56: undefined symbol: clGetExtensionFunctionAddressForPlatform, version OPENCL_1.2

      Does anyone know how to fix it?

      Thanks!

      Reply
      • Hello Roger,

        First nice to hear that you got drivers installed!

        Is this problem only with DVD’s? Or any video with mplayer?

        I just tested some video from Internet using mplayer + NVIDIA 340.xx drivers and it’s working normally. I don’t currently have any DVD player or DVD to test.

        Reply
    8. Hi, JR,

      The problem was with any video. I also had problem with vlc as well.
      When I ran clinfo, I got this msg at the end:
      NOTE: your OpenCL library only supports OpenCL 1.1,
      but some installed platforms support OpenCL 1.2.
      Programs using 1.2 features may crash
      or behave unexpectedly

      I fixed it by replacing libOpenCL.so.1.0.0 in /usr/lib64.

      -rwxr-xr-x. 1 root root 137600 Dec 4 22:02 /lib64/libOpenCL.so.1.0.0*
      -rwxr-xr-x. 1 root root 21712 Dec 4 21:54 /lib64/libOpenCL.so.1.0.0_from_Installer*

      The smaller one is from the installer after I ran the patched command.
      The big one is from 5.8 kernel+Nvidia 340 diver from RPMFUSION. I don’t know which rpm this bigger lib file is from.

      With this bigger libOpenCL, I have no problem with mplayer and vlc. The output of clinfo now ended with:
      NOTE: your OpenCL library declares to support OpenCL 3.0,
      but it seems to support up to OpenCL 2.2 only.

      I hope it continues to work when the next kernel update arrives.

      Reply
      • Hi Roger,

        Thanks! This is actually interesting. I use here original NVIDIA 340xx libOpenCL.so.1.0.0. Have to check that what version RPMFusion use and maybe pack it with patched 340xx version.

        Reply
        • Hi, JR,

          That bigger libOpenCL.so.1.0.0 comes from this package: ocl-icd-2.2.13-1.fc33.x86_64
          from fedora, not from RPM Fusion.

          Reply
    9. Thank you very much!
      Patched version of 390.138 driver worked perfectly with Fedora32 kernel 5.9.11 and an oldie GTX580 board.
      Guide is excellent.

      Reply
    10. Something is wrong with GDM / X : gdm-x-session[2001]: xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)

      01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 620M/630M/635M/640M LE] (rev ff) (prog-if ff)
      !!! Unknown header type 7f
      Kernel modules: nouveau, nvidia_drm, nvidia

      01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev ff) (prog-if ff)
      !!! Unknown header type 7f
      Kernel driver in use: snd_hda_intel
      Kernel modules: snd_hda_intel

      [[email protected] ~] $ nvidia-installer -v |grep version
      nvidia-installer: version 390.138 ([email protected]) Thu May 14 05:09:46 PDT 2020
      [[email protected] ~] $ uname -a
      Linux localhost.localdomain 5.9.11-200.fc33.x86_64 #1 SMP Tue Nov 24 18:18:01 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected] ~] $ lspci |grep -E “VGA|3D”
      00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
      01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 620M/630M/635M/640M LE] (rev ff)

      Thank you for your help

      Reply
    11. AT LAST!!!
      IT TOOK ME TWO DAYS OF BEING REALLY CRANKY, BUT AT LAST IT WORKED.
      PS: if it does not work for you, check you have secureboot unabled in the UEFI.

      Thanks for the tut!

      Reply
    12. This is phantastic, thank you very much!!

      nvidia-installer: version 340.108 ([email protected])

      Linux XXXXX 5.9.14-200.fc33.x86_64 #1 SMP Fri Dec 11 14:30:56 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [NVS 3100M] (rev a2)

      Reply
    13. $ nvidia-installer -v |grep version
      nvidia-installer: version 450.80.02

      $ uname -a
      Linux onbox 5.9.14-200.fc33.x86_64 #1 SMP Fri Dec 11 14:30:56 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

      $ lspci |grep -E “VGA|3D”
      02:00.0 VGA compatible controller: NVIDIA Corporation TU117 [GeForce GTX 1650] (rev a1)

      Reply
    14. Works perfectly…
      nvidia-installer: version 340.108 ([email protected]) Wed Dec 11 15:13:39 PST 2019
      Linux localhost.localdomain 5.9.14-200.fc33.x86_64 #1 SMP Fri Dec 11 14:30:56 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
      01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 300] (rev a2)
      Thank you very much

      Reply
1 110 111 112 113

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close