Fedora 37/36/35 NVIDIA [515.76 / 510.85.02 / 470.141.03 / 390.154 / 340.108] Drivers Install Guide - Comment Page: 123

This is guide, howto install NVIDIA proprietary drivers (manually using .run installer) on Fedora 37/36/35/34/33/32 and disable Nouveau driver. This guide works with GeForce 8/9/200/300/400/500/600/700/800/900/10/20/30 series cards. GeForce RTX 30 series cards works with 515.xx, 510.xx and 470.xx NVIDIA drivers, (RTX 3090, RTX 3080 and RTX 3070, RTX 3060, RTX 3060 Ti) GeForce RTX 20 series cards works with 515.xx, 510.xx and 470.xx NVIDIA drivers (RTX 2080 Ti, RTX 2080, RTX 2070 Ti, RTX 2070, RTX 2060) GeForce GT/GTX 600/700/800/900/10 series cards works with 510.xx, 470.xx, and 390.xx NVIDIA drivers (GTX 1080 Ti, GTX 1080, GTX 1070, GTX 1060, GTX 1660 ...) GeForce GT/GTX 400/500 series...

3,159 comments on “Fedora 37/36/35 NVIDIA [515.76 / 510.85.02 / 470.141.03 / 390.154 / 340.108] Drivers Install Guide - Comment Page: 123

1 121 122 123
    1. fedora35 kernel 5.18+ may need some patch for nvidia driver 390.151 (May 16, 2022).

      Reply
    2. This is a very well put together tutorial.
      Worked like a charm on Fedora 36.
      Hope you’ll update it in the future for next Fedora releases.
      Thank you good sir :)

      Reply
    3. Thank you for your work.
      Please tell me how to open a “Run a Command” modal window on Fedora 36

      Reply
      • Hi Sergey,

        Press ALT+F2 to open “Run a command”.

        Reply
      • Sorry, my mistake. I am did not comply instructions.

        Reply
    4. Hi JR,

      Is there a way I can avoid (in run level 3) having to rerun
      NVIDIA-Linux-x86_64-390.151-patched-kernel-5.18.run
      when a new kernel is installed?

      nvidia-installer -v | grep version responds with
      nvidia-installer: version 390.151 (dvs-builder@U64-E08-26-1) Wed Apr 20

      and uname -a responds with
      Linux anna 5.18.13-200.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Jul 22 14:03:36 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

      and lspci | grep -E “VGA|3D” responds with
      01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1)

      It’s not a big deal, but I was just wondering. The reboot fails whenever I’ve previouly run
      NVIDIA-Linux-x86_64-390.151-patched-kernel-5.18.run (skipping any DKMS options).

      Thanks. Otherwise everything works like a charm.

      Reply
    5. Getting an error:
      ERROR: Failed to run `/usr/sbin/dkms build -m nvidia -v 515.57 -k
      5.18.13-200.fc36.x86_64`: Sign command:
      /lib/modules/5.18.13-200.fc36.x86_64/build/scripts/sign-file
      Signing key: /var/lib/dkms/mok.key
      Public certificate (MOK): /var/lib/dkms/mok.pub
      Binary sign-file not found, module won’t be signed
      Error! Your kernel headers for kernel 5.18.13-200.fc36.x86_64 cannot
      be found at /lib/modules/5.18.13-200.fc36.x86_64/build or
      /lib/modules/5.18.13-200.fc36.x86_64/source.
      Please install the linux-headers-5.18.13-200.fc36.x86_64 package or
      use the –kernelsourcedir option to tell DKMS where it’s located.

      There is no package called linux-headers but kernel-headers.
      I do not know how to solve this, can you please help me?
      Best Regards
      Max

      Reply
    6. sh-5.1# nvidia-installer -v |grep version
      nvidia-installer: version 515.48.07
      sh-5.1# uname -a
      Linux vitor-home 5.18.13-602.inttf.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Jul 28 04:00:12 EDT 2022 x86_64 x86_64 x86_64 GNU/Linux
      sh-5.1# lspci |grep -E “VGA|3D”
      03:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)

      Reply
    7. Package kernel-5.18.13-602.inttf.fc36.x86_64.rpm is not signed
      Please sign so that pgp can allow upgrade!
      Thanks!

      Reply
      • Thanks David, just signed packages. Some reason signing was failed earlier.

        Reply
    8. Hi JR,

      Any response to my previous note of 7/24/22? It’s still behaving that way whenever the kernel gets upgraded, so I have to re-run (in run level 3)
      NVIDIA-Linux-x86_64-390.151-patched-kernel-5.18.run

      Thanks for any thoughts,
      — Peter

      Reply
      • Oh, my bad. I had neglected to realize that 390.151 had been updated to 390.154 as of August 2, 2022. So I switched to 390.154, and probably now my question becomes irrelevant. Hence, never mind about my question.

        Reply
        • Hello Peter,

          If you still have problems with automatic NVIDIA module rebuilding, then please check output of following command:

          dkms status
          Reply
      • I try build new kernels as soon possible, sometimes Fedora developers are much faster.

        Reply
    9. I used this guide on fedora 36, i managed to install the driver, updated the kernel to “Linux fedora 5.18.17-200.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Aug 11 14:36:06 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux” and no problems

      But theres a new update 5.18.18-200, when I install it, the system wont even let me move to tty, i removed the kernel and everything is back to normal, how can I tell its safe to update the kernel?

      https://imgur.com/a/dLxvvGf <— heres whats updated

      Any help will be appreciated

      Reply
      • Hello molotovich,

        You should have kernel on exclude list and use kernel updates from inttf repo. If you install kernel from Fedora updates repo, then it won’t work.

        Reply
    10. NOTE: Take a look at the notes for version 340, you should use the patched kernel driver.

      [Jhonny@JhonnyVaioFedora ~]$ nvidia-installer -v|grep version
      nvidia-installer: version 340.108 (buildmeister@swio-display-x64-rhel04-01)
      [Jhonny@JhonnyVaioFedora ~]$ uname -a
      Linux JhonnyVaioFedora 5.19.8-602.inttf.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Mon Sep 12 10:59:47 EEST 2022 x86_64 x86_64 x86_64 GNU/Linux
      [Jhonny@JhonnyVaioFedora ~]$ lspci|grep -E “VGA|3D”
      01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [GeForce 310M] (rev a2)
      [Jhonny@JhonnyVaioFedora ~]$

      Reply
    11. I did the install over the last nvidia drivers, the installer removed the previous one..

      Now it gets stuck on loading once again, but when I switch to another TTY and run the installer as soon as it loads, im thrown to the desktop (not 1 minute before)

      Reply
1 121 122 123

Leave a Reply to Andriy Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Exit mobile version
Close