Fedora 37/36/35 NVIDIA Drivers Install Guide [525.60.11 / 520.56.06 / 515.86.01 / 510.108.03 / 470.161.03 / 390.157 / 340.108] - Comment Page: 124

This is guide, howto install NVIDIA proprietary drivers (manually using .run installer) on Fedora 37/36/35/34/33/32 and disable Nouveau driver. This guide works with GeForce 8/9/200/300/400/500/600/700/800/900/10/20/30/40 series cards. GeForce RTX 40 series cards works with 525.xx, 520.xx NVIDIA drivers, (RTX 4090) GeForce RTX 30 series cards works with 525.xx, 520.xx, 515.xx, 510.xx and 470.xx NVIDIA drivers, (RTX 3090, RTX 3080 and RTX 3070, RTX 3060, RTX 3060 Ti) GeForce RTX 20 series cards works with 525.xx, 520.xx, 515.xx, 510.xx and 470.xx NVIDIA drivers (RTX 2080 Ti, RTX 2080, RTX 2070 Ti, RTX 2070, RTX 2060) GeForce GT/GTX 600/700/800/900/10 series cards works with 510.xx, 470.xx,...

3,203 comments on “Fedora 37/36/35 NVIDIA Drivers Install Guide [525.60.11 / 520.56.06 / 515.86.01 / 510.108.03 / 470.161.03 / 390.157 / 340.108] - Comment Page: 124

1 122 123 124 125
    1. nvidia-installer: version 470.141.03
      [[email protected] ~]$ uname -a
      Linux fedora 5.18.16-602.inttf.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Aug 5 08:54:23 EDT 2022 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected] ~]$ lspci |grep -E “VGA|3D”
      03:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 730] (rev a1)

      Reply
      • I try build new kernels as soon possible, sometimes Fedora developers are much faster.

        Reply
    2. I used this guide on fedora 36, i managed to install the driver, updated the kernel to “Linux fedora 5.18.17-200.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Aug 11 14:36:06 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux” and no problems

      But theres a new update 5.18.18-200, when I install it, the system wont even let me move to tty, i removed the kernel and everything is back to normal, how can I tell its safe to update the kernel?

      https://imgur.com/a/dLxvvGf <— heres whats updated

      Any help will be appreciated

      Reply
      • Hello molotovich,

        You should have kernel on exclude list and use kernel updates from inttf repo. If you install kernel from Fedora updates repo, then it won’t work.

        Reply
    3. Thank you so much for this guide! I got it working on Fedora 36 (dual boot with an old iMac!).
      Vanilla Fedora installs with kernel 5.17. After system update, it was 5.18. Then, following your guide the kernel was upgraded to 5.19 (inttf patched). Everything went smooth. Thanks again!

      sudo lspci -k | grep -A 2 -E “(VGA|3D)”
      [sudo] password for root:
      03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400] (rev b1)
      Subsystem: Apple Inc. iMac 9,1
      Kernel driver in use: nvidia

      Reply
    4. NOTE: Take a look at the notes for version 340, you should use the patched kernel driver.

      [[email protected] ~]$ nvidia-installer -v|grep version
      nvidia-installer: version 340.108 ([email protected])
      [[email protected] ~]$ uname -a
      Linux JhonnyVaioFedora 5.19.8-602.inttf.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Mon Sep 12 10:59:47 EEST 2022 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected] ~]$ lspci|grep -E “VGA|3D”
      01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [GeForce 310M] (rev a2)
      [[email protected] ~]$

      Reply
    5. I did the install over the last nvidia drivers, the installer removed the previous one..

      Now it gets stuck on loading once again, but when I switch to another TTY and run the installer as soon as it loads, im thrown to the desktop (not 1 minute before)

      Reply
    6. hi there,
      I updated my fedora from 33 to 36. However only kernel which works for me is old 5.11.10-200.fc33. I installed nvidia installer version 460.67. During upgrade I installed 5.19.10-200.fc36 and then I installed your kernel 5.19.10-602.inttf.fc36. But none of those kernel will boot up successfully.
      I can’t get my kernel or any kernel to boot in run level 3. I have also downloaded newer nvidia installer NVIDIA-Linux-x86_64-470.141.03.run.
      but I am unable to install that either.
      Now one way would be to remove all old nvidia installed stuff, which seems to be not letting any other kernel boot up or even let running kernel bootup in run level 3. But I am not sure how to do that.
      Do you know if there is a way to get newer kernel with newer nvidia installer working?

      Reply
    7. forgot to mention I have GTX 980

      Reply
    8. I’m running Fedora 36.

      I successfully followed your directions; journalctl did not show the errors I had following rpmfusion’s directions.

      However, the result was the same: many (perhaps all) graphical applications show scrambled windows on start up in Wayland.

      Unfortunately, I have several applications (e.g., web browsers) which require Wayland.

      What and where is the “Enable Wayland guide” you mentioned? I don’t see it on your site (or anywhere else).

      Let me know if you need anything from me to help solve this.

      Thanks!
      Fred

      Reply
    9. I’m running Fedora 36.

      I successfully followed your directions; journalctl no longer shows the errors I had following rpmfusion’s instructions.

      However, the result was the same: many (perhaps all) graphical applications produce scrambled, unreadable windows.

      I tried the “Enable XWayland” instructions, but they don’t seem to apply to my system.

      I didn’t see any route to “disable wayland” in the 61.rules.d file.

      If this piques your interest, let me know what information you need to investigate this.

      Thanks!

      Reply
    10. I’ve been using your guide since, roughly, Fedora 29, but have not been able to get Wayland to work acceptably under F36 or F37 beta.

      I can’t get Wayland to work consistently: Most Gnome apps (such as Settings) and also Calibre produce illegibly scrambled windows.

      There’s nothing suspicious that I can see in dmesg or journalctl.

      All suggestions gratefully received.

      Thanks!

      System details:

      $ nvidia-installer -v | grep version
      nvidia-installer: version 515.76

      $ uname -a
      Linux fedora 5.19.14-602.inttf.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Oct 6 13:07:31 EEST 2022 x86_64 x86_64 x86_64 GNU/Linux

      $ lspci | grep -E “VGA|3D”
      0a:00.0 VGA compatible controller: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] (rev a1)
      41:00.0 VGA compatible controller: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] (rev a1)

      Reply
    11. []# nvidia-installer -v |grep version
      nvidia-installer: version 515.76
      []# uname -a
      Linux localhost-live 5.19.14-602.inttf.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Oct 6 12:32:45 EEST 2022 x86_64 x86_64 x86_64 GNU/Linux
      []# lspci |grep -E “VGA|3D”
      01:00.0 VGA compatible controller: NVIDIA Corporation GA102 [GeForce RTX 3080 Lite Hash Rate] (rev a1)
      [[email protected] crwayman]#

      Reply
    12. installed 5.19.15-602.inttf.fc36.x86_64 and system dosnt boot to login screen.
      nvidia-installer: version 515.65.01
      Linux fedora36 5.19.14-702.inttf.fc36.x86_64 #1 SMP Thu Oct 6 13:41:19 EEST 2022 x86_64 x86_64 x86_64 GNU/Linux
      01:00.0 VGA compatible controller: NVIDIA Corporation GP108 [GeForce GT 1030] (rev a1)

      does this mean i have to install NVIDIA-Linux-x86_64-520.56.06.run in order for the 5.19.15-602 to work?

      Reply
      • You can upgrade to NVIDIA 520.56.06 or simply reboot to runlevel 3 and run installer again. I guess that some reason kernel modules are not build automatically. Maybe some dkms error?

        Reply
        • No luck. I made a image backup and installed the nvidia and system dosnt boot into login screen. It hangs on the dkms and when it finishes I’m presented with a blank screen with a blinking cursor. I’ll revert back to the original ssd and stick with 515 nvidia and skip the next inttf kernel update after 5.19.15 as 5.19.15 seems broken as it would even boot into the login screen with numerous errors . Tbh I just can’t be bothered reinstalling and hacking Linux to run properly as it takes longer to perfect then Windows

          Reply
        • #You can upgrade to NVIDIA 520.56.06 or simply reboot to runlevel 3 and run installer again. #

          You mean 515 drivers or?

          Reply
    13. 5.19.15 xx fails to boot up properly. just presented with 3 nvidia square dots and hangs

      Package kernel-5.19.15-602.inttf.fc36.x86_64 is already installed.
      Package kernel-core-5.19.15-602.inttf.fc36.x86_64 is already installed.
      Package kernel-devel-5.19.15-602.inttf.fc36.x86_64 is already installed.
      Package kernel-devel-matched-5.19.15-602.inttf.fc36.x86_64 is already installed.
      No match for argument: kernel-headers-5.19.15-602.inttf.fc36
      Package kernel-modules-5.19.15-602.inttf.fc36.x86_64 is already installed.
      Package kernel-modules-extra-5.19.15-602.inttf.fc36.x86_64 is already installed.

      Reply
    14. I have used this method for a few years now on an Asus G750 (765M), thank you! Could you please post steps to reverse the process on Fedora 36 (i.e., restore Nouveau and remove Nvidia)? I’ve gotten to a place where the Nvidia driver is uninstalled, but I can’t get the Nouveau driver to load, even though it is no longer blacklisted. It’s had me stumped for a couple days, so maybe others would appreciate the reverse instructions too.

      Reply
1 122 123 124 125

Leave a Reply to Jeremy Morris Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close