Fedora 37/36/35 NVIDIA Drivers Install Guide [525.85.05 / 520.56.06 / 515.86.01 / 510.108.03 / 470.161.03 / 390.157 / 340.108] - Comment Page: 125

This is guide, howto install NVIDIA proprietary drivers (manually using .run installer) on Fedora 37/36/35/34/33/32 and disable Nouveau driver. This guide works with GeForce 8/9/200/300/400/500/600/700/800/900/10/20/30/40 series cards. GeForce RTX 40 series cards works with 525.xx, 520.xx NVIDIA drivers, (RTX 4090) GeForce RTX 30 series cards works with 525.xx, 520.xx, 515.xx, 510.xx and 470.xx NVIDIA drivers, (RTX 3090, RTX 3080 and RTX 3070, RTX 3060, RTX 3060 Ti) GeForce RTX 20 series cards works with 525.xx, 520.xx, 515.xx, 510.xx and 470.xx NVIDIA drivers (RTX 2080 Ti, RTX 2080, RTX 2070 Ti, RTX 2070, RTX 2060) GeForce GT/GTX 600/700/800/900/10 series cards works with 510.xx,...

3,217 comments on “Fedora 37/36/35 NVIDIA Drivers Install Guide [525.85.05 / 520.56.06 / 515.86.01 / 510.108.03 / 470.161.03 / 390.157 / 340.108] - Comment Page: 125

1 123 124 125 126
    1. Thank you so much for this! I tried and tried to get nvidia drivers working in fedora 37, but every time I’d end up with no sound. This guide worked perfect for me. When its time to update to a newer version of fedora, will this continue working?

      Reply
    2. It looks like 390.154 is going to need a patch for 6.0 kernels.

      Reply
      • Yes, patched version is available.

        Reply
    3. Does the 470 driver work with the 6.0 kernel?
      I had the drivers installed via rpmfusion but with kernel 6.0 it reverted to the nouveau driver

      Reply
    4. Thanks again, JR. Everything worked. On a fresh install of fedora 36:

      nvidia-installer -v | grep version:
      nvidia-installer: version 390.154 ([email protected]) Wed Jun 22

      uname -a:
      Linux localhost-live 5.19.16-602.inttf.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Mon Oct 17 16:51:38 EEST 2022 x86_64 x86_64 x86_64 GNU/Linux

      lspci | grep -E “VGA|3D”:
      01:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1)

      Reply
    5. Is the 470 driver compatible with the 6.0 kernel?
      I have a GT 710 and the proprietary drivers installed through rpmfusion but I noticed that since upgrading to the newer kernel the driver reverted to nouveau.
      I’m asking because I don’t know if trying to manually install the driver will do anything.
      Thanks in advance

      Reply
      • Hello Fab,

        Yes patched version should work without problems with my custom 6.0.x kernels. Check also my inttf-patcher script.

        Reply
    6. I followed these instructions to the letter 3 times and every time it fails at step 2.7. I reboot to a black screen. I am falling back to Fedora 36 and I will wait for the official release and hope Nvidia driver config is easier in the official release.

      Reply
      • Hello Dwayne,

        Could you tell me more about your system? This sounds like you have NVIDIA Optimus laptop?

        Reply
    7. Hi JR,

      I tried, on fedora 36, with kernel now 6.0.7-602.inttf, but it failed with 390.154. It works fine with kernel 5.19.16-602.inttf.
      lspci | grep VGA shows
      01:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1)

      uname -a shows
      Linux localhost 5.19.16-602.inttf.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Mon Oct 17 16:51:38 EEST 2022 x86_64 x86_64 x86_64 GNU/Linux

      I guess I’ll wait until kernel-6.xx shows up on your list.

      Thanks for everything.

      Reply
    8. nvidia-installer: version 520.56.06
      Linux edi 6.0.7-602.inttf.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Nov 4 14:26:34 EET 2022 x86_64 x86_64 x86_64 GNU/Linux
      01:00.0 VGA compatible controller: NVIDIA Corporation GA104 [GeForce RTX 3070 Ti] (rev a1)
      success – thx a lot :-)

      Reply
      • Excellent! You’re welcome!

        Reply
    9. $ nvidia-installer -v |grep version
      nvidia-installer: version 515.76

      $ uname -a
      Linux xxx-xxxxxx-xx 5.14.18-100.fc33.x86_64 #1 SMP Fri Nov 12 17:38:44 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

      $ lspci |grep -E “VGA|3D”
      01:00.0 VGA compatible controller: NVIDIA Corporation GA102 [GeForce RTX 3090] (rev a1)

      Reply
    10. nvidia-installer: version 525.53 (520 problem too)

      Linux arthaslinuxpc 6.0.8-602.inttf.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Mon Nov 14 20:55:10 EET 2022 x86_64 x86_64 x86_64 GNU/Linux

      01:00.0 VGA compatible controller: NVIDIA Corporation GA104 [GeForce RTX 3060] (rev a1)

      The problem is that after installing nvidia drivers, I see small stripes, let’s say in the terminal, they are dominated by a green shade, in the pictures where the colors are predominantly black, I see these stripes even stronger. I tried to remove them using the screen settings, but this is a bad solution, everything is fine on debian11 and ubuntu 22.04, windows too, the problem is not in the monitor. Because without drivers, the picture where the monotonous color should be in order, for example, the terminal, and after installing the drivers, these unpleasant stripes are everywhere. The picture seems to be divided by small pixels of green and reddish shades. I tried to find a solution, but I found a couple of mentions about it on the Internet without a solution. CPU i7 8700k + RTX 3060. The hardware is excellent, but these problems force me to return to Debian 11 with xfce4, which I’m used to, but I wanted to try Fedora with Gnome. The first thing I noticed when I launched the game was that the glow around the logo (originally red) on Fedora was yellowish and everything was striped, the black areas remained black. On white and gray, if you look closely, you can see that my monitor draws everything as if in a small cell, everything is filled with small square pixels everywhere.

      Reply
      • Thanks for reporting this.

        What NVIDIA drivers you use with Debian 11? Is Fedora working normally without NVIDIA drivers?

        Could you post some picture about these small stripes?

        Reply
    11. Any tips for Fedora major version upgrade? Is the process the same?

      Reply
    12. I see your guide says:

      “GeForce GT/GTX 600/700/800/900/10 series cards works with 510.xx, 470.xx, and 390.xx NVIDIA drivers”

      Note I am currently running Fedora 36 with a GTX 970 on driver version x86_64-515.76. No problems so far.

      Reply
    13. Hello. Spent a wet Sunday following your guide to see if I could run 4 monitors on 2 GPUs. Long story short– SUCCESS!!!! Thanks for all your hard work.
      nvidia-installer: version 515.76
      Linux fedora 6.0.9-602.inttf.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Nov 18 16:20:56 EET 2022 x86_64 x86_64 x86_64 GNU/Linux
      01:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1)
      02:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1)

      Reply
    14. The Patch for the Driver 470.141.03 is not working properly if you try to apply their inttf auto patcher. Instead you do the follow:

      0.sudo dnf install patch -y

      1.Download manually the driver 470.141.03 (nvidia website) and the patch for the Kernel 6.0.x (https://gitlab.com/herecura/packages/nvidia-470xx-dkms/-/raw/9c88952c1504e32ba3656cb0e2afd9286d2a763d/kernel-6.0.patch?inline=false)

      USING THE TERMINAL

      2.Unpack to a folder ./NVIDIA-Linux-x86_64-470.141.03.run –extract-only

      3.Go to folder NVIDIA-Linux-x86_64-470.141.03/kernel

      4.type this: patch –verbose –backup –strip=1 –input=/path/to/kernel-6.0.patch

      After the patch is complete you can follow the rest of this website tutorial

      *there is no need to repack the nvidia driver. Just navigate to NVIDIA-Linux-x86_64-470.141.03 and type ./nvidia-install to install the patched driver and you are done!

      Reply
      • Hello Gabriel,

        What kind of problem you have with inttf patcher? Do you have problem with installing drivers or creating installer?

        Reply
    15. I have done all procedures for FC37 and indeed the native nvidia driver (*515.76) works.

      BUT the both sound cards were not identified by the kernel 6.0.9-602.inttf.fc37.x86_64.
      And i have not any audio, while in FC36 i had.

      What can i do now?
      Cheers,
      Sergei

      Reply
1 123 124 125 126

Leave a Reply to Arthur Urbano Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close