Fedora 37/36/35 NVIDIA Drivers Install Guide [530.30.02 / 525.89.02 / 520.56.06 / 515.86.01 / 510.108.03 / 470.161.03 / 390.157 / 340.108] - Comment Page: 126

This is guide, howto install NVIDIA proprietary drivers (manually using .run installer) on Fedora 37/36/35/34/33/32 and disable Nouveau driver. This guide works with GeForce 8/9/200/300/400/500/600/700/800/900/10/20/30/40 series cards. GeForce RTX 40 series cards works with 530.xx, 525.xx, 520.xx NVIDIA drivers, (RTX 4090) GeForce RTX 30 series cards works with 530.xx, 525.xx, 520.xx, 515.xx, 510.xx and 470.xx NVIDIA drivers, (RTX 3090, RTX 3080 and RTX 3070, RTX 3060, RTX 3060 Ti) GeForce RTX 20 series cards works with 530.xx, 525.xx, 520.xx, 515.xx, 510.xx and 470.xx NVIDIA drivers (RTX 2080 Ti, RTX 2080, RTX 2070 Ti, RTX 2070, RTX 2060) GeForce GT/GTX 600/700/800/900/10 series...

3,233 comments on “Fedora 37/36/35 NVIDIA Drivers Install Guide [530.30.02 / 525.89.02 / 520.56.06 / 515.86.01 / 510.108.03 / 470.161.03 / 390.157 / 340.108] - Comment Page: 126

1 124 125 126 127
    1. nvidia-installer: version 525.53
      Linux localhost-live 6.0.9-602.inttf.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Nov 18 16:20:56 EET 2022 x86_64 x86_64 x86_64 GNU/Linux
      0e:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2070 SUPER] (rev a1)

      Reply
    2. Linux fedora 6.0.9-602.inttf.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Nov 18 16:20:56 EET 2022 x86_64 x86_64 x86_64 GNU/Linux
      00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630] (rev 02)
      01:00.0 3D controller: NVIDIA Corporation GP107GLM [Quadro P620] (rev a1)

      Reply
    3. This version seems to work fine on 6.0.x kernels (tested on F36) without any patching:

      Linux X64 (AMD64/EM64T) Display Driver
      Version: 470.161.03
      Release Date: 2022.11.22

      Reply
    4. Just wanted to give a quick heads up that NVIDIA has 390.157 out officially, so someone in inttf can update the driver list.

      Reply
    5. Hi JR,

      Well, I did a fresh install of Fedora 37 on my SSD drive, and noticing that NVIDIA now has 390.157 available, went through your guide above, and tried it out (sans any patch), and all ran successfully.
      Thanks so much. The kernel is now 6.0.9.

      The output from nvidia-installer -v | grep version is
      nvidia-installer: version 390.157 ([email protected]) Wed Oct 12

      and uname -a says
      Linux misty 6.0.9-602.inttf.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Nov 18 16:20:56 EET 2022 x86_64 x86_64 x86_64 GNU/Linux

      and lspci |grep -E “VGA|3D” says
      01:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1).

      Reply
      • Hi Peter,

        Excellent! I updated all guides and published 6.0.10 kernel.

        Reply
    6. Freakin legend! Thank you for this!

      Was trying to get rpmfusion based drivers to work with my custom kernel to no end. This worked perfectly!

      Reply
      • Excellent to hear Justin! You’re welcome!

        Reply
      • Nope it’s not fixed, check Bug report which is linked on page you post https://bugzilla.redhat.com/show_bug.cgi?id=2071209 it’s closed with status “can’t fix”.

        So at least for me with vanilla NVIDIA drivers this is not working, because Fedora kernel have SIMPLEDRM enabled (just grep kernel 6.0.10 config). If it works for you then you can use Fedora kernel of course.

        Reply
    7. [Successful installation with 1050Ti]

      nvidia-installer: version 525.60.11
      Linux lima 6.0.11-300.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Dec 2 20:47:45 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
      00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630]
      01:00.0 VGA compatible controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] (rev a1)

      Reply
      • Excellent! Thanks for sharing!

        Reply
      • I found a thread at linuxquestions that says running modprobe video before running the nvidia installer, fixes this problem. It did for me.

        Reply
    8. Hi,

      nvidia-installer: version 525.89.02
      Linux fedora 6.1.10-603.inttf.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Tue Feb 7 16:35:45 EET 2023 x86_64 x86_64 x86_64 GNU/Linux
      09:00.0 VGA compatible controller: NVIDIA Corporation TU102 [GeForce RTX 2080 Ti Rev. A] (rev a1)
      41:00.0 VGA compatible controller: NVIDIA Corporation TU102 [GeForce RTX 2080 Ti] (rev a1)

      =======================
      only issue: the DKMS part failed in the installation

      Many Thanks, graet work!

      Reply
      • Hi,

        Nice to hear that it’s working. Actually DKMS part is changed on newest NVIDIA drivers. It build module first, then it looks like it fail, but actually it should be registered totally ok. You will see it, what happens when you update your kernel.

        Reply
    9. I have error when install img: https://ibb.co/GvzY2ym
      But when i done install, i check “dkms status”
      end see : nvidia/525.89.02, 6.1.12-603.inttf.fc37.x86_64, x86_64: built

      p.s sry for my english

      Reply
      • This is totally correct, NVIDIA’s new installer works this way.

        Reply
    10. Where is the source code for the kernel patches?

      Reply
    11. Linux fedora 6.0.7-301.fc37.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Nov 4 18:35:48 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
      01:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2080 SUPER] (rev a1)

      after follow all in this web site and the command work, when i start my linux, i don’t see my loging user i write mon code and enter the wallpaper is here but, i don’t have gnome desktop nothing juste wallpaper. i try many think install Xcfe and more think and is always the same result. I Don’t know why ?

      Reply
      • Hello,

        You are using wrong kernel. You should use inttf kernel >=6.1.14.

        Reply
    12. Hi, everything works smoothly on X, but when I try on Wayland, it falls back on Software Rendering.
      I am on Fedora 37, i7-5820K, GTX 770, driver version 470.161.03
      Thanks for your help !

      Elvio

      Reply
    13. Hi! I’m got the following error while trying to run the installation script without a graphic interface:

      “ERROR: An NVIDIA kernel module ‘nvidia’ appears to already be loaded in your kernel. This may be because it is in use (for example, by an X server, a CUDA program, or the NVIDIA Persistence Daemon), but this may also happen if your kernel was configured without support for module unloading. Please be sure to exit any programs that may be using the GPU(s) before attempting to upgrade tour driver. If no GPU-based programs are running, you know that your kernel supports unloading, and you still receive this message, then an error may have ocurred that has corrupted an NVIDIA kernel module’s usage count, for which the simplest remedy is to reboot your computer.”

      I tried rebooting in case the issue would be fixed by itself but it didn’t, so I gessed there was some daemon running that prevents the script from upgrading my drivers

      I solved this by checking the daemon’s pids using “ps -U0 -o ‘tty,pid,comm’ | grep ^? | grep nvidia” and using “service {daemon name} stop” to stop all of them (stoping only nvidia-powerd seemed to stop all 3 of them at once)

      Just in case this may help other people, if you already had installed Nvidia Drivers in a different way, remember to uninstall them before starting this process, that should avoid the issues I had

      Anyway, thanks for the guide!

      Reply
1 124 125 126 127

Leave a Reply to haaun Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close