Fedora 36/35/34 NVIDIA [515.65.01 / 510.85.02 / 470.141.03 / 390.154 / 340.108] Drivers Install Guide - Comment Page: 30

This is guide, howto install NVIDIA proprietary drivers (manually using .run installer) on Fedora 36/35/34/33/32 and disable Nouveau driver. This guide works with GeForce 8/9/200/300/400/500/600/700/800/900/10/20/30 series cards. GeForce RTX 30 series cards works with 515.xx, 510.xx and 470.xx NVIDIA drivers, (RTX 3090, RTX 3080 and RTX 3070, RTX 3060, RTX 3060 Ti) GeForce RTX 20 series cards works with 515.xx, 510.xx and 470.xx NVIDIA drivers (RTX 2080 Ti, RTX 2080, RTX 2070 Ti, RTX 2070, RTX 2060) GeForce GT/GTX 600/700/800/900/10 series cards works with 510.xx, 470.xx, and 390.xx NVIDIA drivers (GTX 1080 Ti, GTX 1080, GTX 1070, GTX 1060, GTX 1660 ...) GeForce GT/GTX 400/500 series...

3,151 comments on “Fedora 36/35/34 NVIDIA [515.65.01 / 510.85.02 / 470.141.03 / 390.154 / 340.108] Drivers Install Guide - Comment Page: 30

1 28 29 30 31 32 123
    1. So report from 4.7.4-200.fc24.x86_64, ThinkPak P50 notebook.
      lspci give:
      00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
      01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro M1000M] (rev a2)

      I followed tutorial above, installation of driver NVIDIA-Linux-x86_64-367.44 went smoothly, but after reboot system got stuck before gui login has appeared. So I reverted installation with this tutorial (point 4) and restored to previous state and it worked perfectly.

      Then after a couple of days I started playing with UEFI and changed
      Hybrid Graphics to Discrete Graphics at Config/Display page of UEFI.
      then lspci give:
      01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro M1000M] (rev a2)
      =)
      So I followed tutorial once more with NVIDIA-Linux-x86_64-370.28, and everything now is OK, laptop works with new nvidia driver.
      Important note: Now having nvidia driver I tried to change Discrete graphics to Hybrid graphics in UEFI but without success – fedora will stuck before gui login. Looks like I can now develop vulkan app but it will affect the battery life.
      Thank you for this tutorial. Amazing job.

      Reply
      • Hi kotu :+)

        Would you be able to provide more details of exactly what you did with the UEFI config? I am in a similar situation – I have 2 controllers and cannot switch off the Intel one in BIOS, and I do not have optimus. I am using Fedora 24.

        Also, what you have done could be very useful to a lot of people – lots of new computers could have this problem.

        Regards :+)

        Reply
    2. Thanks for the guide. Worked perfectly.

      nvidia-installer: version 340.98 ([email protected])

      Linux localhost.localdomain 4.7.4-100.fc23.x86_64 #1 SMP Thu Sep 15 18:48:53 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

      01:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 320M] (rev a2)

      Reply
    3. Great guide, thank you.

      nvidia-installer -v |grep version
      nvidia-installer: version 370.23 ([email protected])

      uname -a
      4.7.5-200.fc24.x86_64 #1 SMP Mon Sep 26 21:25:47 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

      lspci |grep -i VGA
      01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1)

      Reply
    4. Thank you very much for this guide!
      I was setting up my graphic card and it worked as a shine.

      I had a little struggle of my own fault on the process, but managed to solve it :)
      I somehow tought that if I downloaded the latest fedora.iso it would be completely up to date, obviously it wasn’t ;)
      So I had to repeat the process of installing a new kernel at non-gui which was a nice experience to me.

      Here’s the result of my successful installation:

      nvidia-installer: version 370.28 ([email protected])

      Linux localhost.localdomain 4.7.4-200.fc24.x86_64 #1 SMP Thu Sep 15 18:42:09 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

      01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)

      Reply
    5. Got it working for VGA passthrough (VFIO), host steamos, guest Fedora 24, qemu 2.6, kvm=off and hv_vendor_id used to hide virtualization otherwise NVIDIA driver fails at NVRM rminitadapter failed. no rom provided to guest

      nvidia-installer: version 370.28 ([email protected])
      Linux localhost.localdomain 4.7.5-200.fc24.x86_64 #1 SMP Mon Sep 26 21:25:47 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
      00:07.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)

      Reply
    6. This how-to is amazing!

      [[email protected] ~]# nvidia-installer -v | grep version
      nvidia-installer: version 340.98 ([email protected]) Mon Sep 19 18:06:32 PDT 2016
      [[email protected] ~]# uname -a
      Linux hm02 4.7.5-200.fc24.x86_64 #1 SMP Mon Sep 26 21:25:47 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected]m02 ~]# lspci | grep -i VGA
      05:00.0 VGA compatible controller: NVIDIA Corporation G92 [GeForce 9800 GT] (rev a2)

      Reply
    7. Unable to load the ‘nvidia-drm’ kernel module.
      System : MSI GE60-2PC Apache
      OS : Fedora 24 Cinnamon (EFI)

      Reply
    8. Thank you very much!
      Here’s the result of my installation:

      nvidia-installer: version 367.44 ([email protected])

      Linux localhost.localdomain 4.7.5-200.fc24.i686 #1 SMP Tue Sep 27 00:03:45 UTC 2016 i686 i686 i386 GNU/Linux

      05:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630] (rev a1)

      Reply
    9. Hi, thank you for your Guide.

      I was able to get to step 2.8.6, and then it showed [ERROR: unable to load the kernel module.]

      driver-version:
      x86_64-304.132

      uname -a:
      Linux localhost.localdomain 4.5.5-300.fc24.x86_64 #1 SMP Thu May 19 13:05:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

      rpm -qa kernel\* |sort -V:
      kernel-4.5.5-300.fc24.x86_64
      kernel-core-4.5.5-300.fc24.x86_64
      kernel-devel-4.5.5-300.fc24.x86_64
      kernel-headers-4.5.5-300.fc24.x86_64
      kernel-modules-4.5.5-300.fc24.x86_64
      kernel-modules-extra-4.5.5-300.fc24.x86_64

      last log before ERROR:
      ……
      -> Driver file installation is complete.
      -> Installing DKMS kernel module:
      -> done
      ERROR: Unable to load the kernel module.: Installation has failed.
      ……

      Please help me

      Reply
    10. Well done. Thank you.

      nvidia-installer: version 370.28 ([email protected])

      uname -a: Linux deathstar 4.7.6-200.fc24.x86_64 #1 SMP Mon Oct 3 20:10:24 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

      lspci |grep -i VGA: 01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2)

      Reply
    11. I tried this on Asus K501UB notebook with 370.* drivers. After system boots, it shows “Something went wrong, please log out and try again”. After I click “Log out” button, system returns to error screen again.

      Reply
    12. Bought card today and you made my night. Thanks!

      [email protected] ~$ nvidia-installer -v |grep version
      nvidia-installer: version 367.57 ([email protected]) Mon Oct 3 21:42:31 PDT 2016

      [email protected] ~$ uname -a
      Linux fedora 4.7.6-200.fc24.x86_64 #1 SMP Mon Oct 3 20:10:24 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

      [email protected] ~$ lspci |grep -i VGA
      01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 950] (rev a1)

      Reply
    13. I have not suspected it to be done so problem-free.
      Thank you.

      nvidia-installer -v |grep version:nvidia-installer
      version 367.57 ([email protected]) Mon Oct 3 21:42:31 PDT

      uname -a
      Linux localhost.localdomain 4.7.6-200.fc24.x86_64 #1 SMP Mon Oct 3 20:10:24 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

      lspci |grep -i VGA
      01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1)

      Reply
    14. Hi again,

      I posted earlier saying I couldn’t get it to work on 4.7.2-201. I tried again now with 4.7.5 and it works. So, I guess I will never know what was the problem, but it’s solved apparently.

      Thanks for the tutorial!

      Cheers,

      Fred

      Reply
    15. Kernel 4.7.7 ok, after recompiling patched version 96.

      [[email protected] ~]$ nvidia-installer -v |grep version
      nvidia-installer: version 340.96 ([email protected]) Sun Nov 8 22:50:33 PST 2015

      [[email protected] ~]$ uname -a
      Linux MACH3 4.7.7-200.fc24.x86_64 #1 SMP Sat Oct 8 00:21:59 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

      [[email protected] ~]$ lspci |grep -i VGA
      01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)

      Reply
1 28 29 30 31 32 123

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close