Fedora 28/27/26 nVidia Drivers Install Guide - Comment Page: 58

This is guide, howto install nVidia proprietary drivers on Fedora 28/27/26/25/24/23/22/21 and disable Nouveau driver. This guide works with GeForce 6/7/8/9/200/300/400/500/600/700/800/900/10/20 series cards. GeForce 20 series cards works with 410.xx nVidia drivers GeForce 600/700/800/900/10 series cards works with 390.xx, 396.xx and 410.xx nVidia drivers GeForce 400/500 series cards works with 390.xx nVidia drivers GeForce 8/9/200/300 series cards works with 340.xx nVidia drivers GeForce 6/7 series cards works with 304.xx nVidia drivers [inttf_post_ad1] This is totally different guide than my earlier guides, like Fedora 20 nVidia driver install. This guide uses nVidia...

1,993 comments on “Fedora 28/27/26 nVidia Drivers Install Guide - Comment Page: 58

1 56 57 58 59 60 76
    1. > nvidia-installer -v | grep version
      nvidia-installer: version 384.111 ([email protected]) Wed Dec 20 00:05:39 PST 2017
      > uname -a
      Linux XXXX 4.14.11-300.fc27.x86_64 #1 SMP Wed Jan 3 13:52:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
      > lspci | grep -E “VGA|3D”
      01:00.0 VGA compatible controller: NVIDIA Corporation GK208GLM [Quadro K610M] (rev a1)

      Works fine.

      Thank you

      Reply
    2. Animations gone after recent fedora update (yesterday-today). I’m using the latest proprietary driver. Problem remains on my both machines. Is there any workaround over this bug?

      Reply
      • Hi Floody,

        What you mean with animations?

        Reply
      • The solution is to reinstall the same Nvidia drivers again following the guide…

        I had the same problem. I think it is caused by the updates of xorg-x11-server-*
        (-Xorg, -Xwayland or -common).

        The Nvidia proprietary drivers were attempted to uninstall. I saw something in the in the output when installing updates with dnf upgrade.
        Anyway your installation is altered and the Nvidia drivers aren’t loaded as expected.

        Reply
    3. O get Black screen after 2.7 reboot.
      What should i do?

      Reply
      • Hi Mazzo,

        Do you see Grub? Is your Fedora booting?

        Reply
        • Hi!
          I couldn’t see the grub.
          I formated. Now it works on nouveau driver, but only after the grub, before that itś all blackscreen.

          Reply
    4. I get “Unable to load the ‘nvidia-drm’ kernel module” error during the NVidia part.
      I tried this (sudo systemctl set-default graphical.target). Boots into Graphical Login, but then KDE Freezes. Please help.

      Reply
      • Now I can’t even get back into Command Line Boot. Do I have to reinstall Fedora?

        Reply
      • Hi Alexei,

        Do you have secureboot enabled on BIOS/UEFI? Try to disable it.

        Reply
    5. >nvidia-installer -v |grep version
      nvidia-installer: version 384.111 ([email protected])

      >uname -a
      Linux localhost.localdomain 4.14.13-300.fc27.x86_64 #1 SMP Thu Jan 11 04:00:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

      >lspci |grep -E “VGA|3D”
      0a:00.0 VGA compatible controller: NVIDIA Corporation GK110 [GeForce GTX 780] (rev a1)

      **
      Tried this because Civ5/steam would completely freeze the system. After this it just crashes…

      System works great though. Haven’t noticed any annoying delays when opening windows yet.

      Thanks!

      Reply
      • System keeps freezing(no ping/ssh/CTRLALT F) at random. Fedora 27 is worse than redhat 3.1 or what it was in 1986.

        To bad, I really like the rest of it.

        Reply
        • Try logout and login once a day

          Reply
        • Ubuntu 16.04 LTS and “Add additional drivers” have been completely stable this past time.

          Also, Civ 5: A poster, “P-IH”, on reddit wrote “I had the same problem. I changed “MaxSimultaneousThreads” in the file .local/share/Aspyr/Sid Meier’s Civilizatio 5/config.ini from 8 to 16. In my case it fixed the problem”

          Fixed my problem there as well.

          Reply
    6. Thank you, works very good.

      nvidia-installer: version 384.111 ([email protected]) Wed

      Linux digiplace.localdomain 4.14.13-300.fc27.x86_64 #1 SMP Thu Jan 11 04:00:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

      01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 760] (rev a1)

      Reply
    7. It works, but you should add for russian guys
      After removing nouveau and reboot you`ve into tty1 WITHOUT any suport of russian letters, so you shoud replace driver.run from folder ‘Загрузки’ to any folder with enlish latters, for example, i replace it to /home

      Reply
      • Sorry for my english

        Reply
    8. nvidia-installer: version 384.111 ([email protected]) Wed Dec 20 00:05:39 PST 2017
      Linux localhost.localdomain 4.14.13-300.fc27.x86_64 #1 SMP Thu Jan 11 04:00:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
      09:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1)

      Reply
    9. nvidia-installer: version 384.111 (buildmei[email protected]) Wed Dec 20 00:05:39 PST 2017

      Linux me 4.14.13-300.fc27.x86_64 #1 SMP Thu Jan 11 04:00:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

      01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)

      Reply
    10. Hi, Thanks so much for the guidance. Now I finally installed the Nvidia Driver on my Fedora 27. I am using GeForce 210, and with your patched version of 340.114 it’s finally done! I no long see the line on my screen when I scroll it too fast!

      Here’s the output from the command:
      [[email protected] ~]$ nvidia-installer -v |grep version
      nvidia-installer: version 340.104 ([email protected])
      [[email protected] ~]$ uname -a
      Linux localhost.localdomain 4.14.13-300.fc27.x86_64 #1 SMP Thu Jan 11 04:00:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected] ~]$ lspci |grep -E “VGA|3D”
      01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
      04:00.0 Audio device: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] (rev 01)

      Reply
    11. Success.
      Thx.

      [[email protected] betatester]# nvidia-installer -v |grep version
      nvidia-installer: version 384.111 ([email protected])
      [[email protected] betatester]# uname -a
      Linux myq6600.bitsland 4.14.13-300.fc27.x86_64 #1 SMP Thu Jan 11 04:00:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
      [[email protected] betatester]# lspci |grep -E “VGA|3D”
      01:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 730] (rev a1)
      [[email protected] betatester]#

      Reply
    12. Thanks for this tutorial! =)

      # nvidia-installer -v | grep version
      nvidia-installer: version 384.111 ([email protected]) Wed Dec 20 00:05:39 PST 2017

      # uname -a
      Linux woodstock 4.14.13-300.fc27.x86_64 #1 SMP Thu Jan 11 04:00:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

      # lspci | grep -E “VGA|3D”
      22:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)

      Reply
    13. Wow!! Thank you! Been hanging out in run-level 3 for last few days trying to get this working.

      Fedora 26
      4.14.13-200
      Nvidia GT218 (Geforce 210)

      Used your NVIDIA-Linux-x86_64-340.104-patched-kernel-4.14.run and your simple easy to read instructions and I’m finally back in runlvl 5.

      Reply
    14. All done. But now login page falls back on itself when I try to login.
      Any suggestion?

      Reply
      • Hi Gianni,

        Do you get any error? Do you use Gnome and GDM? Fedora 27?

        Please tell also some info about your nVidia card and drivers version?

        Reply
    15. I always get a blank screen after login. I have a Dell Latitude E6510 with Fedora 27 and gnome desktop.

      I have followed all the steps without problem.

      My graphics card is an Nvidia Quadro NVS 3100M.

      The system starts smoothly but, after login, the system gets stuck with a blank screen.

      I’ve tried lots of solutions, but with no success.

      Anyone could help me?

      Reply
      • Hello Vicente,

        Could you post output of following commands:

        nvidia-installer -v |grep version
        
        lspci |grep -E "VGA|3D"
        Reply
1 56 57 58 59 60 76

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close